Mechanical; Torx Recess Head Screws - Tait T880 II Series Adjustment Manual

M880-00
2

Mechanical

2.1

Torx Recess Head Screws

Torx recess head screws are becoming the standard screw head type in all T800 Series II
equipment, with Pozidriv and Philips recess head screws being used in fewer applica-
tions.
The Torx recess head has the advantage of improved screwdriver tip location, reducing
the chances of screw head damage caused by the driver tip rotating within the recess. In
addition, using a ball-tip Torx screwdriver allows you to drive a Torx head screw with
the driver on a slight angle, which can be useful in situations where access is restricted.
It is important that you use the correct Torx screwdriver tip:
M3 screws -
M4 screws -
Figure 2.1 below shows a typical Torx recess head screw (actual hardware may differ
slightly from this illustration due to variations in manufacturing techniques).
"star" shaped recess with
six internal notches
Copyright TEL
T10
T20.
Figure 2.1 Torx Screw Identification
Mechanical A2.1
10/07/00