Surface Mount Devices; Cased Mica Capacitors - Tait T880 II Series Adjustment Manual

A3.2 Component Replacement
3.2

Surface Mount Devices

Caution:
Surface mount devices (SMDs) require special storage, handling,
removal and replacement techniques. This equipment should be serv-
iced only by an approved Tait Dealer or Customer Service Organisa-
tion equipped with the necessary facilities. Repairs attempted with
incorrect equipment or by untrained personnel may result in perma-
nent damage. If in doubt, contact your nearest Tait Dealer or Customer
Service Organisation.
3.3

Cased Mica Capacitors

Cased mica capacitors can be removed by heating the top with a heavy-duty soldering
iron and gently lifting the capacitor off the PCB with a solder-resistant spike or equiva-
lent.
10/07/00
M880-00
Copyright TEL