General; Additional Technical Information; Caution: Cmos Devices - Tait T880 II Series Adjustment Manual

M880-00
1

General

1.1

Additional Technical Information

If you have any questions about this manual or the equipment it describes, please con-
tact your nearest Tait Dealer or Customer Service Organisation. If necessary, you can
get additional technical help from Customer Support, Radio Systems Division, Tait Elec-
tronics Ltd, Christchurch, New Zealand (full contact details are on page 2).
When requesting information, please quote either the manual product code (e.g.
M880-00-2A0), or the equipment product code and serial number which are printed on a
label on the back of the product (as shown in
Figure 1.1 Typical Product Code & Serial Number Labels
If you require information about a particular PCB, please quote the full PCB internal
part number (IPN) which is screen printed onto the top side of the board (refer to the
appropriate PCB Information section in this manual for more details).
1.2

Caution: CMOS Devices

This equipment contains CMOS Devices which are susceptible to damage from static
charges. Care when handling these devices is essential. For correct handling proce-
dures refer to the manufacturers' data books, e.g. Philips data books covering CMOS
devices, or Motorola CMOS data books, Section 5 'Handling', etc.
An anti-static bench kit (refer to
the following product codes:
• KS0001 - 1 conductive rubber bench mat
- 1 earth lead to connect the mat to ground
• KS0004 - 1 wrist strap.
Copyright TEL
this area used for regional
Type Approval information
T838-10-0000
Rev 1
900000
Tait Electronics Limited
Made in New Zealand
Figure 1.2) is available from Tait Electronics Ltd under
Figure 1.1).
product code
T835-10-0000
serial number
Tait Electronics Limited
Made in New Zealand
General A1.1
Rev 1
900000
10/07/00