Using A Cable Coupler To Extend A Cable; Using A Cable Coupler As A Break-Out Box - Bosch DICENTIS Hardware Installation Manual

DICENTIS
B
Figure 5.1: Screw max dimensions
5.1.1

Using a cable coupler to extend a cable

The DICENTIS Cable coupler can be used to extend cables, as it allows you to connect
DICENTIS Cable assemblies together. This way, it is possible to connect, for example, three 25
m (DCNM-CB25-I) cables together to form a 75 m cable.
Note:
–
–
5.1.2

Using a cable coupler as a break-out box

The DICENTIS Cable coupler can be used in a floor pod as a break-out box, for example, if you
want to connect temporary devices like a rostrum microphone. The cable coupler can be
fixated using the screw holes (2.5 mm) or via a tie wrap through the recessed area.
Note:
–
–
Bosch Security Systems B.V.
A
C
A
B
C
The cable length is not allowed to exceed 100 m.
No more than 2 cable couplers can be used in one trunk.
The cable length is not allowed to exceed 100 m.
No more than 2 cable couplers can be used in one trunk.
Hardware Installation Manual
Installation material and tools | en
Flat head
8 mm
2 mm
2.5 mm
33
2021.01 | V2.2 |