Bosch DICENTIS Hardware Installation Manual page 18

18 en | System installation design and planning
Power supply capacity
The total system network cable length and connected devices determine the required power
supply capacity. The power within the DICENTIS Conference System is supplied by:
–
–
Calculation tool
The calculation tool can be used to calculate the total power capacity of the system. This
makes the design and planning of the DICENTIS Conference System easier. The calculation
tool uses the power consumption of the devices and the system network cable lengths to
calculate the needed system power supply capacity.
The calculation tool is on the DVD supplied with the Audio processor and powering switch and
is part of the DICENTIS software DCNM.iso file. The DCNM.iso file can be downloaded from
the Bosch website at:
2021.01 | V2.2 |
The Audio processor and powering switch and the Powering switch, or
Off‑the‑shelf PoE Ethernet switches.
https://licensing.boschsecurity.com/software
Hardware Installation Manual
DICENTIS
Bosch Security Systems B.V.