Removal Cable Guide (Interpreter Desk Lbb 3520/10); Installing Intercom Handset To Lbb 3520/10 - Bosch Digital Congress Network Installation And Operating Manual

Digital Congress Network | Installation and Operating Manual | Chapter 3 - Interpretation Equipment
3.1.1 Removal cable guide (FIG
To access the cable guide proceed as follows:
1. Wrap a small cord round the cable guide and pull firmly in the direction shown.
2. Place the head of a screwdriver in the cable guide groove as shown and twist gently.
2
Underside Interpreter desk LBB 3520/10
5
6
FIG 3-3 Removal of cable guide

3.1.2 Installing Intercom Handset to LBB 3520/10

Handsets can be mounted and attached to the rear of an Interpreter desk LBB 3520/10, using a metal
mounting plate LBB 3556/00, screws and two spire speed nuts. The spire speed nuts are delivered
with the unit, and the securing screws are delivered with the mounting plate.
NOTE:
When mounting the handset, spire speed nuts need to be mounted on the unit
after first removing the units cable guides (see
Using the available mounting facilities, handsets can be mounted for both left and right hand users. In
systems using flush-mounted units, handsets with cradles can be table-top mounted or fixed to an
adjacent wall using the screw-holes on the handset cradle.
Bosch Security Systems | 04-2003 | 3922 988 43318 en
3-3) (Interpreter desk LBB 3520/10)
5
6
(see FIG 3-4)
FIG 3-4).
Get other manuals https://www.bkmanuals.com
1
2
Interpreter desk LBB 3520/10
3
4 5
7
Interpreter desk LBB 3520/10
8
FIG 3-4 Installing Intercom handset to an Interpreter desk LBB 3520/10
LBB 3520/10 Interpreter desk with back-lighting LC-display
en | 3-4
Key to Symbols
1. Screws A
2. For mounting 'spire' speed
nuts
2
3. Handset
4. Handset cradle
5. Screws B
6. For flush and table top
mounting
7. Mounting plate LBB 3556/00
8. To intercom handset
LBB 3555/00
6