Typical System Setup - Bosch DICENTIS Hardware Installation Manual

10 en | System installation overview
3.1

Typical system setup

Figure 3.1: Typical DICENTIS Conference System setup
A typical DICENTIS Conference System consists of:
1.
2.
3.
4.
5.
6.
7.
2021.01 | V2.2 |
System server (DCNM-SERVER):
– The heart of the system. It licenses functionality, configures and controls the system.
Client PC:
– Can be used to: Manage meetings, prepare meetings and configure the system.
Optional video camera (Onvif Profile-S compatible cameras, Sony IP cameras via CGI
commands, or Panasonic HD Integrated IP) + external power supply:
– Captures the image of a speaking participant.
Ethernet switch:
– Ethernet switch with PoE on some ports.
- Routes the system data via Ethernet.
- Provides power to the DICENTIS devices via PoE.
CAT‑5e Ethernet cable (minimum requirement).
Powering switch (DCNM-PS2):
– Is used to increase the number of DICENTIS devices connected to the system.
Audio processor and powering switch (DCNM-APS2):
– Controls the system audio, routes audio from and to the system and supplies power
to the DICENTIS devices.
Hardware Installation Manual
DICENTIS
Bosch Security Systems B.V.