Bosch DICENTIS Hardware Installation Manual page 24

24 en | System installation design and planning
Figure 4.3: Powering switch
Item
1, 5
2, 6
3, 7
4, 8
9
10
11
12
13
15, 17, 19
14, 16, 18, 20
Network and Power connector
Socket 1 (12)
Socket 2 (13)
Socket 3 (15)
Socket 4 (17)
Socket 5 (19)
Tab. 4.5: Power supply capacity DCNM‑APS2 / DCNM‑PS2
2021.01 | V2.2 |
Description
XLR line outputs 1 and 2.
RCA line outputs 1 and 2.
XLR line inputs 1 and 2.
RCA line inputs 1 and 2.
Mains inlet, mains switch and fuse holder.
Reset button.
Ground switch (grounded or floating).
Socket 1 without power.
Socket 2 low power.
Socket 3, 4, 5 high power.
Overload LED for sockets 2‑5:
Green: Power OK.
Red: Overload. Remove cable and wait a few seconds for the system to
reset the overload.
Hardware Installation Manual
Max. power output (W) Max. devices
No power capacity
15
144
144
144
DICENTIS
---
1
40
40
40
Bosch Security Systems B.V.