Bosch DICENTIS Hardware Installation Manual page 55

DICENTIS
Power LED state Description
OFF
How to install
To install the Dante gateway:
4
4
4
Bosch Security Systems B.V.
The device has no power
Connect the Dante network port in the OMN-DANTEGTW to a network port in the Dante
network.
Connect the OMNEO network port in the OMN-DANTEGTW to the OMNEO network.
Connect the mains supply.
Hardware Installation Manual
Mechanical installation of Central Equipment | en
How to solve
– Check the Ethernet connector
LEDs:
– If they are lighted, power-cycle
the Dante gateway to restart it.
– If the Ethernet LEDs are off,
the power supply is probably
broken and needs to be
exchanged.
55
2021.01 | V2.2 |