2, About Each Of The Functions - Korg DSS-1 Owner's Manual

¿.About Each of the Functions
rFOSAM PLEIrani
ill About the sample start function
■ Sam ples the signal from the AU DIO IN jack and stores
that sample in the memory block with the sample
number specified by the F1 S A M P L E NO, /MEM DIV,
function,
9 You can sample repeatedly as many limes as you
like. Each sample will replace the previous one in the
selected memory block. This makes it easy to keep
trying until you get satisfactory results.
■ Input signal level is shown on the peak hold bar graph
meter while sampling, this allows you to adjust the in­
put to obtain an appropriate signal level.
■ You can monitor the input signal via the regular audio
outputs* so you can hear what it sounds like.
Example: Using a memory division of 8.
Memory block as specified by sample number
selected by F1 SAMPLE NO /MEM DIV function.
I
*
0 4
O l 0 2 0 3
^ r n m
1
Input signal from audio in jack is
sam pled and recorded in this
m em ory block._________________
n rj 0 6 0 7
63