Korg DSS-1 Owner's Manual page 212

■ Note: if the intensity value is too high when in the
auto bend down mode, then pitch may not change in­
itially when some keys are played. This condition is
indicated by a " W " in the display.
This occurs when the intensity setting pushes the
pitch bend starting
transpose upper limit" (determined by the relation­
ship between sampling frequency and readout fre­
quency) of the sound assigned to that part of the
keyboard,
A sound with a sampling frequency of 32kHz, for in­
stance, will have a "pitch transpose upper limt" of
one octave. If you take such a sound and raise the in­
tensity setting too high, then you get this situation
with some keys in the sou n d 's assigned range.
F21 NOISE LEVEL
1 1 About the noise level function,
■ A s a sound source in addition to oscillator-1 and
oscillator-2, you can also access white noise. This is
a random waveform that includes all audio frequen­
cies. Useful for adding "breath noise" to wind instru­
ment sounds and for effects like wind* surf, and gun­
shots,
¡2] Using the noise level function,
■ Press 2 then 1, or use DATA E N T R Y A to select the
N O IS E L E V E L function.
■ Use DATA E N T R Y B to adjust the value.
212'
point beyound the "pitch
• Intensity too high for sound.
Pitch
A " W " appears in the display if keys producing this ef­
fect appear within the keyboard.
y
Indicates warning.
Possible noise level values
0 0 - 6 3
Noise level display
r----- - ----------
F21 UNITE NOISE
LEUEL = 00
p - ■ ■ ■ ■
Current value.
Note:
If no multisound is assigned to the keyboard (when
power is first turned on or if sounds have been
erased)* then only the lowest octave on the
keyboard will produce noise.
_ ■ , -