Korg DSS-1 Owner's Manual page 221

• Break point level:
Sets the level at which the decay time ends.
• Slope time:
Controls how long it takes for the envelope voltage to
change from the break point level to the sustain level.
The greater the value, the more gradual the volume
change (assuming that there is a ditference in level
between break point and sustain).
• Sustain level:
Sets the (voltage) level at which the slope time ends.
• Release time:
Determines how long it takes for the sound to fade
away after you release a key. The greater the value,
the more gradually the volume will be attenuated.
(This assum es that the sustain level is high enough
so that there will be a change).
2. Using the VGA EG Function
■ Press 3 then 8, or use DATA E N T R Y A to select the
function.
■ Use the cursor keys to select a parameter. Use
DATA E N T R Y B to adjust its value.
Volume
high break point
M s
t
level value.
' i \ \
* I k N
Low break point
level value
i
}
I I
Decay time
Volume
Small slope lime value
t
I
i.
i i
Large slope time
i
value.
Volume
/ ' s
i '
\ S
*
I. \
— V -
i— ;
Slope time
Volume
Display for the VGA EG function,
i
Attack time
Decay lime. Slope time.
Break point level.
-------- -* Time
Sustain level
— Time
High sustain level
/
Low sustain level.
Time
Sustain level.
release time,
221