Korg DSS-1 Owner's Manual page 230

1 Using the pitch bend range function.
■ Select the function by pressing 6 then 1 on the
number keys or by moving the DATA E N T R Y A slider.
■ Use DATA E N T R Y B to adjust the value.
M Note that if this parameter's value is set too high then
some keys may not change in pitch when you move
the joystick to the right. This condition is indicated by
a "W arning" in the display. This occurs when the
pitch bend extends beyond the "pitch transpose up­
per limit" of the sound assigned to that part of the
keyboard.
(Refer to page 40.)
A sound with a sampling frequency of 32kHzt for in­
stance will have a "pitch transpose upper limit" of
one octave. If you raise the intensity setting too high,
then you may exceed this range when you bend the
pitch upward.
F62 VCF SWEEP ON/OFF
L About the VCF sweep on/off function.
■ Left and right movement of the joystick can be used
to sweep the V C F cutoff frequency up and down. F62
lets you choose to turn this feature on or off.
f u s in g the VCF sweep on/off function.
■ Press 6 then 2, or use DATA E N T R Y A to select the
function.
■ Adjust the value by moving DATA E N T R Y B.
1230
Display for pitch bend range function
________________________ *_________________________
F6Î JOYSTICK
FT I L - H BEND KHHLiE:
Current value.
• Possible situation for some keys when pitch bend range is
set very high.
A "W arning" appears in th display if keys producing this
effect appear within the keyboard.
F61 JQVSTIO
PITCH BEND F
Possible VCF SWEEP values
O F F ,
Display for VCF sweep on/off function
______________1____________
F62 J0VSTICK
UCF SWEEP = ON
-------- -f
VCF sweep setting.
- M " ' !
~ r a
. — ■
a
Indicates warning.
______J______
O N