Korg DSS-1 Owner's Manual page 244

F2 SAVE SYSTEM
1 About the save system function
■ This function is used to save the system in memory to
disk as a system labeled A, B p C P or D.
■ Saving a system having no multisounds is the same
as using the All Program Save function. The display
will show "N o M, S N D s Exist". The program contents
on disk will change.
■ Current MIDI parameters are saved with the system.
|2j Using the save system function.
Operation
it Select the S Y S T E M mode. You must have a
disk in the drive. You will save the system to the
disk that is in the drive. Therefore, don't putina
disk that is full of system s that you want to keep.
•]) Press the number 2 key,
244
?
WAVE-MEM.
Operation of DSS-1
• Indicates S Y S T E M mode.
SY ST EM
* » '
On
• The display shows the currently selected system.
Shows the save system function.
PROGRAM-MEM