How To Use The System; Coin Pouring Guidelines - CUMMINS ALLISON JetSort LX User Manual

How to use the system

Coin pouring guidelines

Prior to processing coin:
• Remove non-coin items such as paper clips, hardware, wrappers, candy, gum, etc.
• Remove foreign, mutilated or damaged coin.
• Verify no liquid or moisture is present in the coin container.
Pour coin into the tray.
If the machine has a lift tray, raise the corner of the tray to direct the coin into the funnel
at the right rear of the tray. Coin may also be poured directly into the funnel.
The machine counts and sorts the coin.
non-coin objects inadvertently processed
with coin are culled into the reject
receptacle, located between the bag
holders on the front of the machine. In
some cases, debris and other non-coin
objects must be removed from the sort
table by hand. See instructions in
the sort disk on page 21
jam or debris on page
Coin should be dry and free of debris before pouring into the coin
tray. Liquid, mutilated coin or debris may cause machine damage
or a jam that requires assistance to remove.
Unlatch
and Remove
22.
How to use the system | JetSort LX Attended coin sorter | 5
®