Changing Bags - CUMMINS ALLISON JetSort LX User Manual

Changing bags

Perform bag management tasks on the CoUnT screen. Relevant features are numbered
below and correspond to descriptions in the table that follows.
1
Item
1. Bag indicators
2. Bag selection
3. Clear button
4. Cleared Bags
button
5. Stop Limits
button
6. Clear All Bags
button (not
shown)
Shows fill level in green or red for each bag; red indicates
full bag or reject coin discrimination limit. Bags are identified
numerically and by denomination, left to right as you face the
cabinet. Reject receptacle (center) is labeled "R" (no number).
Light blue highlighting marks selection. Select a bag indicator
once to highlight. only one bag can be selected at a time.
Select to clear the highlighted bag. Bag report prints
automatically when bag is cleared, unless disabled in setup.
Select to display the number of full (F) and partial (P) bags
cleared at each bag station (in bag view area under bag
indicators). not available during counting operations.
Toggles number under bag indicators to display the stop
limit configured for each bag. Not available during counting
operations.
Select to clear all bags at once. Bag reports for each cleared
bag print automatically, unless disabled in setup.
How to use the system | JetSort
6
2
Description
LX Attended coin sorter | 15
®
5
4
3