Unlatch the sort disk
In the event of a table or coin jam, or to remove coins or debris from the disk pad when
using reconcile mode, it may be necessary to raise the sort disk.
To unlatch the sort disk:
1. Press latch release on coin tray.
3. Remove tray and set aside.
.
5. Release latch by turning to align with
cutout.
.
Sort disk rotates and laser light is present when motor is running.
To prevent injury, do not defeat safety interlock switches and
avoid direct eye contact with laser.
2. Tilt tray as shown and move to right.
.
4. Locate the latch in front of coin hopper.
6. Raise sort disk until it is fully open.
Troubleshooting | JetSort
LX Attended coin sorter | 21
®