Huawei SUN2000-60KTL-M0 User Manual page 99

SUN2000-(60KTL, 65KTL)-M0
User Manual (Mexico Edition)
No. Parameter
4 Shutdown at
0% power limit
5 Active power
change gradient
6 Fixed active
power derated
7 Active power
percentage
derating
8 Reactive power
output at night
9 Power factor
10 Reactive power
compensation
(Q/S)
11 Reactive power
compensation
at night (Q/S)
Issue 06 (2020-10-12)
Description
If this parameter is set to
Enable, the SUN2000 shuts
down after receiving the 0%
power limit command. If this
parameter is set to Disable,
the SUN2000 does not shut
down after receiving the 0%
power limit command.
Adjusts the change speed of
the SUN2000 active power.
Adjusts the active power
output of the SUN2000 to a
fixed value.
Adjusts the active power
output of the SUN2000 to a
percentage.
In some specific application
scenarios, a power grid
company requires that the
SUN2000 can perform
reactive power compensation
at night to ensure that the
power factor of the local
power grid meets
requirements.
Adjusts the SUN2000 power
factor.
Adjusts the SUN2000 output
reactive power.
If Reactive power output at
night is set to Enable, no PV
input exists, and no remote
scheduling instruction is
delivered, the SUN2000
responds to this command.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Unit Remarks
N/A N/A
%/s Adjust the active power
based on the percentage
of the rated apparent
power.
kW Pmax_limit is the upper
limit of the maximum
active power.
% If this parameter is set to
100, the SUN2000
delivers power output
based on the maximum
output power.
N/A
This parameter is
configurable only when
Isolation is set to Input
ungrounded, with a
transformer.
N/A
N/A
N/A
N/A
N/A
N/A
92