Huawei SUN2000-60KTL-M0 User Manual page 54

SUN2000-(60KTL, 65KTL)-M0
User Manual (Mexico Edition)
● The metal contacts supplied with the DC connectors are either cold forming
● Crimp the metal cold forming contacts using crimping tool UTXTC0005
● Crimp the metal stamping forming contacts using crimping tool H4TC0003
Figure 5-14 Crimping tool
(1) Locator
Figure 5-15 Preparing positive and negative connectors (using metal cold forming
contacts)
(1) Positive metal contact (cold forming)
(3) Positive connector
Issue 06 (2020-10-12)
NO TICE
contacts or stamping forming contacts. Choose the crimping tools that fit the
metal contact types. Do not mix up the tools.
(Amphenol, recommended) or H4TC0001 (Amphenol).
(Amphenol, recommended), H4TC0002 (Amphenol), PV-CZM-22100 (Staubli),
or PV-CZM-19100 (Staubli). When choosing PV-CZM-22100 or PV-CZM-19100,
do not use the locator. Otherwise, metal contacts would be damaged.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(2) Negative metal contact (cold forming)
(4) Negative connector
47