Huawei SUN2000-60KTL-M0 User Manual page 91

SUN2000-(60KTL, 65KTL)-M0
User Manual (Mexico Edition)
Figure 7-5 Grid parameters (special user)
----End
Parameter List
No. Parameter
1 Grid code
2 Isolation
4 Auto start upon grid
recovery
5 Grid connection
duration after power
grid recovery
6 Grid reconnection
voltage upper limit
Issue 06 (2020-10-12)
NO TE
Vn represents the rated voltage and Fn represents the rated frequency.
Description
Set this parameter based on the grid code of
the country or region where the SUN2000 is
used and the SUN2000 application scenario.
Specifies the working mode of the SUN2000
according to the grounding status at the DC
side and the connection status to the grid.
Specifies whether to allow the SUN2000 to
automatically start after the power grid
recovers.
Specifies the waiting time for SUN2000 restart
after the power grid recovers.
The standards of certain countries and regions
require that the SUN2000 must not export
power to the power grid again when the grid
voltage exceeds the value of Grid reconnection
voltage upper limit after the SUN2000 shuts
down due to a fault.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Unit
N/A
N/A
N/A
s
V
84