Determining The Installation Position; Environment Requirements - Huawei SUN2000-60KTL-M0 User Manual

SUN2000-(60KTL, 65KTL)-M0
User Manual (Mexico Edition)
Type Tool
Measuring tape
Heat gun
PPE
Safety gloves

4.3 Determining the Installation Position

4.3.1 Environment Requirements

Basic Requirements
●
●
●
●
Issue 06 (2020-10-12)
Digital or bubble
level
Cable tie
Safety goggles
NO TE
UTXTC0005 is used to crimp metal cold forming contacts, while H4TC0003 is used to crimp
metal stamping forming contacts.
Do not install the inverter in working or living areas.
If the device is installed in public places (such as parking lots, stations, and
factories) other than working and living areas, install a protective net outside
the device, set up a safety warning sign to isolate the device, and prevent
unauthorized personnel from approaching the inverter. This is to avoid
personal injury or property loss caused by accidental contact or other reasons
during device operation.
Do not install the inverter in areas with flammable materials.
Do not install the inverter in areas with explosive materials.
Copyright © Huawei Technologies Co., Ltd.
Hydraulic pliers
N/A
Anti-dust respirator
4 Installation
Heat shrink tubing
N/A
Safety shoes
21