Huawei SUN2000-60KTL-M0 User Manual page 50

SUN2000-(60KTL, 65KTL)-M0
User Manual (Mexico Edition)
Figure 5-9 Three-core cable (excluding the ground cable and neutral wire)
(A) Core wire
Figure 5-10 Four-core cable (including the ground cable but excluding the neutral
wire)
Step 4 Crimp an OT terminal.
Step 5 Land the AC output power cable in the terminal block, and tighten the nuts with a
torque wrench that has an extension rod.
● Ensure that AC terminations provide firm and solid electrical connections.
● When connecting a PE cable, secure the screws using a socket wrench with an
● If the AC output power cables are subject to a pulling force because the
Issue 06 (2020-10-12)
NO TICE
Failing to do so may cause SUN2000 malfunction and damage to its terminal
block, even starting thermal events. Any SUN2000 damaged due to weak
termination will result in revocation of product warranty.
extension wrench longer than 200 mm.
inverter is not installed stably, ensure that the last cable that bears the stress is
the PE cable.
Copyright © Huawei Technologies Co., Ltd.
(B) Insulation layer
5 Electrical Connections
(C) Jacket
43