Huawei SUN2000-60KTL-M0 User Manual page 89

SUN2000-(60KTL, 65KTL)-M0
User Manual (Mexico Edition)
No. Parameter
9 Communication
interrupt
shutdown
10 Communication
interruption
duration
11 Soft start time
12 Hibernate at
night
13 MBUS
communication
14 Upgrade delay
Issue 06 (2020-10-12)
Description
The standards of certain
countries and regions require
that the SUN2000 must shut
down after the
communication is interrupted
for a certain time.
Specifies the duration for
determining communication
interruption, and is used for
automatic shutdown for
protection in case of
communication interruption.
Specifies the duration for the
power to gradually increase
when the SUN2000 starts.
The SUN2000 monitors PV
strings at night. If Hibernate
at night is set to Enable, the
monitoring function of the
SUN2000 will hibernate at
night, reducing power
consumption.
For SUN2000 models that
support both RS485
andMBUS communication,
when RS485 communication
is used, you are advised to
set MBUS communication to
Disable to reduce power
consumption.
Upgrade delay is mainly
used in the upgrade
scenarios where the PV
power supply is disconnected
at night due to no sunlight or
unstable at dawn or dusk
due to poor sunlight.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Unit Remarks
N/A If Communication
interrupt shutdown is set
to Enable and the
SUN2000 communication
has been interrupted for a
specified time (set by
Communication
interruption duration),
the SUN2000 will
automatically shut down.
min N/A
s N/A
N/A N/A
N/A N/A
N/A After the SUN2000 upgrade
starts, if Upgrade delay is
set to Enable, the upgrade
package is loaded first.
After the PV power supply
recovers and the activation
conditions are met, the
SUN2000 automatically
activates the upgrade.
82