Huawei SUN2000-60KTL-M0 User Manual page 115

SUN2000-(60KTL, 65KTL)-M0
User Manual (Mexico Edition)
Item
Maximum total
harmonic
distortion (rated
power)
Note a: The rated output voltage is determined by Grid code, which can be set
on the SUN2000 app, SmartLogger, or NetEco.
Note b: Choose whether to connect the neutral wire to the SUN2000-60KTL-M0
based on the application scenario. When it is used in the scenarios without
neutral wires, set Output mode to Three-phase, three-wire. When it is used in
the scenarios with neutral wires, set Output mode to Three-phase, four-wire.
Note c: When the Grid code for the SUN2000-60KTL-M0 is set to Mexico-
MV480, and the SUN2000-60KTL-M0 is used for power generation in 440 V AC
grid connection, you need to adjust the level-1 and level-2 undervoltage
protection threshold to 384 V. The proper AC output voltage is within the range
of 384–576 V.
Protection
Item
Input DC switch
Anti-islanding
protection
Output
overcurrent
protection
Input reverse
polarity protection
PV string fault
detection
DC surge
protection
AC surge
protection
Insulation
resistance
detection
Residual current
monitoring unit
(RCMU)
Issue 06 (2020-10-12)
SUN2000-60KTL-M0
SUN2000-60KTL-M0
Copyright © Huawei Technologies Co., Ltd.
10 Technical Specifications
SUN2000-65KTL-M0
< 3%
SUN2000-65KTL-M0
Supported
Supported
Supported
Supported
Supported
Type II
Type II
Supported
Supported
108