Huawei SUN2000-60KTL-M0 User Manual page 53

SUN2000-(60KTL, 65KTL)-M0
User Manual (Mexico Edition)
Figure 5-13 DC terminals
Select DC input terminals according to the following rules:
1.
2.
Cable Specifications
Cable Type
PV cable that meets
the 1100 V standard
Cables with high rigidity, such as armored cables, are not recommended, because
poor contact may be caused by the bending of the cables.
Procedure
Step 1 Prepare positive and negative connectors.
Use the Amphenol Helios H4 PV connectors provided with the SUN2000. If the
terminals are lost or damaged, purchase the PV connectors of the same model.
The device damaged caused by incompatible PV connectors is not covered under
any warranty or service agreement.
Issue 06 (2020-10-12)
Evenly distribute DC input power cables on the DC input terminals controlled
by the two DC switches.
Maximize the number of connected MPPT circuits.
NO TICE
CA UTION
Copyright © Huawei Technologies Co., Ltd.
Conductor Cross-Sectional Area
2
(mm )
Range Recommended
value
4.0–6.0 (12–10 4.0 (12 AWG)
AWG)
5 Electrical Connections
Cable Outer
Diameter (mm)
4.5–7.8
46