Kubota EA330-E4 Series Workshop Manual page 123

EA330-E4, WSM
Camshaft Alignment
1. Support the camshaft with V block on the surface plate and set
a dial indicator with its tip on the intermediate journal at right
angle.
2. Rotate the camshaft on the V block and get the misalignment
(half of the measurement).
3. If the misalignment exceeds the allowable limit, replace the
camshaft.
Camshaft alignment Allowable limit
1-S58
ENGINE
0.08 mm
0.003 in.
9Y1211018ENS0103US0
KiSC issued 05, 2015 A