Kubota EA330-E4 Series Workshop Manual page 29

EA330-E4, WSM
Piston Pin Bushing Replacing Tool
Application
• Use to press out and to press fit the piston pin bushing.
Material
• S43C
Heat Treatment
• Hardening, Anneal.
A 22.90 to 22.95 mm dia. (0.9016 to 0.9035 in. dia.)
B 19.90 to 19.95 mm dia. (0.7835 to 0.7854 in. dia.)
C 15 mm dia. (0.59 in. dia.)
D 8 mm (0.3 in.)
E 25 mm (0.98 in.)
F 100 mm (3.94 in.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
C0.3 Chamfer 0.3 mm (0.012 in.)
Flywheel Stopper
Application
• Use to loosen and tighten the flywheel nut.
Material
• SS41.
A 235 mm dia. (9.25 in. dia.)
B 30 mm (1.2 in.)
C 20 mm (0.79 in.)
D 30 mm (1.2 in.)
E 26 mm (1.0 in.)
F 8 mm (0.3 in.)
G 10 mm dia. (0.39 in. dia.)
G-13
GENERAL
9Y1211018GEG0016US0
9Y1211018GEG0017US0
KiSC issued 05, 2015 A