Kubota EA330-E4 Series Workshop Manual page 30

EA330-E4, WSM
Crank Gear Puller
Application
• Use exclusively to pull out easily the crank gear.
Material
• (1) Hexagonal Bar Steel
• (2) SS41
A 125 mm (4.92 in.)
B 95 mm (3.7 in.)
C 5 mm (0.2 in.)
D 20 mm (0.79 in.)
E 10 mm (0.39 in.)
F 19 mm (0.75 in.)
G 10 mm dia. (0.39 in. dia.)
H M16 × P1.5
I 0.87 rad (50 °)
J 30 mm (1.2 in.)
K 11.5 mm (0.453 in.)
L 7 mm (0.3 in.)
M 13.5 mm (0.531 in.)
N M16 × P1.5
O 60 mm (2.4 in.)
P 18 mm (0.71 in.)
Q 12 mm (0.47 in.)
C2 Chamfer 2 mm (0.08 in.)
R0.5 R0.5 mm (0.02 in.)
R4.5 R4.5 mm (0.18 in.)
R14 R14 mm (0.55 in.)
G-14
GENERAL
9Y1211018GEG0018US0
KiSC issued 05, 2015 A