Usb Interface; Auxiliary I/O Interface (Aux); Sound Output Interface - Pro-face GP-3500 Series Replacement Manualbook

To change the setting of the output destination folder, see
setting of the external media to
2.6.3 USB Interface (for GP-3500 series only)
GP-3500T/S/L has two USB ports (USB Type A) but GP-4500 series has only one.
If devices are connected to both USB ports on GP-3500 series, use an USB hub for
GP-4500 series. Because of bus power limit on GP-4500 series USB port, it's
recommended to use an USB hub supporting self-power supply and be sure to
check the operation before
Also, several USB devices of the same category in the following table cannot be
simultaneously used. Even if multiple USB devices of the same category are
connected to the display unit, only the first USB device recognized by the display
unit can be used.
USB Devices of the same category
Category
1 Printer, USB-PIO converter
2 Keyboard, Numeric keys, Barcode reader
3 Mouse
4 USB storage (USB memory, CF/SD card reader, and so on)
5 USB transfer cable
USB-Serial (RS-232C) conversion cable, SUB/RS-422/485
6
Conversion Adapter
2.6.4 Auxiliary I/O Interface (AUX) (for GP-3500 series only)
GP-4500 series is not equipped with Auxiliary I/O Feature. External Reset Input
and 3 Outputs (RUN Output, System Alarm Output, and External Buzzer Output)
that can be used for GP-3500 series cannot be used.
2.6.5 Sound Output Interface (for GP-3500 series only)
GP-4500 series is not equipped with the sound output function. The sound output
function for GP-3500 series cannot be used.
use].
use.
USB Device
17/46
[5.1 Changing the