Interface Specifications; Serial Interfaces (Com1) - Pro-face GP-2300 Series User Manual

Chapter 2 - Specifications
2.3

Interface Specifications

2.3.1 Serial Interfaces (COM1)

This interface can be either RS-232C or RS-422. Connects GP to Host/PLC.
(Socket-Type Connector)
Pin Assignments
1
13
Recommended Connector:
OMRON>
Recommended Cover:
Jack Screws:
• Use rough metric type M2.6x0.45 p threads used to secure the cable's set
screws.
Recommended Cable: CO-MA-VV-SB5P x 28AWG <made by HITACHI Cable
Ltd.>
• To confirm your PLC's connection specifications , refer to
2-6
Pin # Signal Name
1 FG
2
3 RD
4
5
6 DR
7 SG
8 CD
9 TRMX
14
10 RDA
11 SDA
12 NC
13 NC
14 VCC
15 SDB
16 RDB
25
17
18 CSB
19 ERB
20
21 CSA
22 ERA
23 NC
24 NC
25 NC
Dsub25pin plug XM2A-2501<made by
Dsub25pin cover XM2S-2511<made by OMRON>
Dsub25pin cover XM2S-2521<made by OMRON>
XM2Z-0071<made by OMRON>
Pro-Designer On-line Help
Condition
Frame ground
SD Send data (RS-232C)
Receive data (RS-232C)
RS Request send (RS-232C)
CS Clear send (RS-232C)
Data Set Ready (RS-232C)
Signal ground
Carrier detect (RS-232C)
Termination (RS-422)
Receive data A (RS-422)
Send data A (RS-422)
No connection (Reserved)
No connection (Reserved)
5V±5% output 0.25A
Send data B (RS-422)
Receive data B (RS-422)
RI Ring Indicate (RS-232C)
Clear send B (RS-422)
Enable receive B (RS-422)
ER Enable receive (RS-232C)
Clear send A (RS-422)
Enable receive A (RS-422)
No connection (Reserved)
No connection (Reserved)
No connection (Reserved)
GP-2300/2301 Series User Manual