Chapter 3 Replacement Procedure; Work Flow - Pro-face GP-3500 Series Replacement Manualbook

Chapter 3 Replacement Procedure

3.1 Work Flow

Installation
Check the compatibility of
hardware in Chapter 2.
Remove GP/ST-3500
series.
When replacing
GP/ST-3500 series to
GP-4500 series process
the panel.
Install GP-4500 series.
Connect the power cord.
Check the performance
and start operation.
*1: This step is required if screen data is saved only in the GP unit, not in any other device.
Screen
Receive screen data from
GP/ST-3500 series. *1
Change the received data
on GP-Pro EX.
Check and modify the
data on GP-Pro EX.
Transfer the screen data
to GP-4500 series.
22/46
Communication
Check the connection
between GP4500 series
and a PLC in the GP-Pro
EX Device/PLC
Connection Manual.
Connect GP-4500 series
and PLC with the PLC's
cable.
Start connection and
check the communi-
cation.