Chapter 5 Appendix; Changing The Setting Of The External Media To Use - Pro-face GP-3500 Series Replacement Manualbook

Chapter 5 Appendix

5.1 Changing the setting of the external media to use

If a CF card is used for GP/ST-3500 series, after the display unit type of the project file
is changed to GP-4500 series, "a CF card" is automatically replaced with "a SD card"
for the external media setting.
(1) After conversion of the project file data, at GP-Pro EX Error Check, if the message,
"The project contains features that require a SD card. However, the selected
display does not support SD cards so these features will not run." appears,
<Cause>
The model without a SD card slot has the setting that uses a SD card.
->Solution 1
(2) To use a USB flash drive instead of a SD card
(3) To check or change the SD card's data output destination folder setting
->Solution 2
->Solution 1
44/46