Cf Card Interface - Pro-face GP-3500 Series Replacement Manualbook

For more information, please refer to USB/RS-422/485 Conversion Adapter
Installation Guide.
(http://www.pro-face.com/otasuke/download/manual/cgi/manual.cgi?mode=33
&cat=3)
IMPORTANT
When using USB/RS-422/485 Conversion Adapter (PFXZCBCBCVUSR41) with a
display unit, the device/PLCs you can connect to its serial interface
(RS-422/485) are limited. To check the connection configuration, please refer to
refer to USB/RS-422/485 Conversion Adapter Connection Guide
(http://www.pro-face.com/otasuke/files/manual/gpproex/new/device/data/co
m_usc.pdf)

2.6.2 CF Card Interface

GP-4500 series is not equipped with a CF card slot. But a SD card slot and a USB
interfaces are installed. In order to use the GP/ST-3500 series data saved in the CF
card and the functions using the CF card, use a SD card or a USB flash drive
instead.
* When using a SD card with GP-4500 series, please verify it supports the following
specifications:
SD
SDHC
When the setting of the output destination folder is set to "CF Card" on GP-Pro EX,
if you change the display unit type, the setting will automatically change to the one
that uses a SD card.
File format
FAT16
FAT32
16/46
Maximum capacity
2GB
32GB