Cf Card Installation And Removal - Pro-face GP-2300 Series User Manual

3.5

CF Card Installation and Removal

When using the GP Unit and a CF Card, follow the precautions
below:
• Prior to inserting or removing a CF Card, be sure to turn the
GP unit's CF Card ACCESS switch OFF and to confirm that
the ACCESS lamp is not lit. If you do not, CF Card internal
data may be damaged or lost.
• While a CF Card is being accessed, NEVER turn OFF or
reset the GP, or insert or remove the CF Card. Prior to per-
forming these operations, create and use a special GP appli-
cation screen that will prevent access to the CF Card.
• Prior to inserting a CF Card, familiarize yourself with the CF
Card's front and rear face orientation, as well as the CF Card
connector's position. If the CF Card is not correctly posi-
tioned when it is inserted into the Mulit Unit, the CF Card's
internal data and the GP unit may be damaged or broken.
• Be sure to use only CF Cards manufactured by the Digital
Electronics Corporation. The CF Card's internal data may be
damaged when using another manufacturer's CF Card.
• Once GP data is lost, it cannot be recovered. Since acciden-
tal data loss can occur at any time, be sure to back up all GP
screen and CF Card data regularly.
• Be sure to follow the instructions given below to prevent the
CF Card's internal data from being destroyed or a CF Card
malfunction from occuring:
• DO NOT bend the CF Card.
• DO NOT drop or strike the CF Card against another
object.
• Keep the CF Card dry.
• DO NOT touch the CF Card connectors.
• DO NOT disassemble or modify the CF Card.
GP-2300/2301 Series User Manual
Chapter 3 - Installation and Wiring
CAUTIONS
Pro-Designer On-line Help
3-11