236
Windows 2000 Supplemental Information
Using Standby
8
Click OK again, then close the Control Panel.
NOTE
Starting again from Standby
To start up the computer from Standby mode, press the power
button until the on/off light changes to green. The computer
returns to the screen you were using.
If you put the computer in Standby mode by closing the
display panel, you can start it again by opening the display
panel.
NOTE
Quickly changing your Shut down mode
You can quickly and easily change your Shut down mode by
using a hot key.
To change your Shut down mode to Standby:
1
Press
pop-up window.
Sample Standby mode window
For more information about the Power Saver utility, see
"Power Saver" on page
If you power down using the Standby command and the
battery discharges fully, your information will be lost. Be sure
to save your work often.
and
simultaneously to display the Standby mode
Fn
F3
167.