Directing The Display Output When You Turn On The Computer - Toshiba S1 User Manual

66
Connecting Other External Devices
Using external display devices
"Directing the display output when you turn on the
computer" on page
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1 Connect the monitor's video cable to the RGB port on the
back of the computer.
2 Connect the device's power cable to a live electrical
outlet.
3 Turn on the external device.
4 Set the display mode by pressing
Display Properties settings. For more information, see
"Directing the display output when you turn on the
computer" on page

Directing the display output when you turn on the computer

Once you've connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
1 While holding down
you want takes effect.
This hot key cycles through the settings in the following
order:
❖
❖
❖
❖
❖
Built-in display only
Built-in display and external device simultaneously
External device only
Built-in display and TV (or other external video device)
simultaneously
TV (or other external video device) only
66.
Fn + F5
66.
, press repeatedly until the setting
Fn F5
, or by setting the
+
Fn F5
):