Starting Again From Standby - Toshiba Portege 2010 User Manual

3 In the Running on batteries area, choose the power mode of
your choice, and click the Details... button. Select the System
Power Mode tab.
4 Select Standby for the options you want.
❖
❖
5 Click Override all Modes with settings here.
6 In the Set to range dialog box, do one of the following:
❖
❖
7 Click OK.
8 Click OK again, then close the Control Panel.
NOTE: For more information about the Power Saver utility, see
your user's guide.

Starting again from Standby

To start up the computer from Standby mode, press the power
button until the on/off light changes to green. The computer
returns to the screen you were using.
If you put the computer in Standby mode by closing the
display panel, you can start it again by opening the display
panel.
When I press the power button
Set this option to Standby so that the computer goes into
Standby mode when you press the power button.
When I close the lid
Set this option to Standby so that the computer goes into
Standby mode when you close the display panel.
Click DC only for the settings to apply only when you
are using battery power.
Click All for the settings to apply whether you are using
battery power or outlet power.
Enhancing Productivity
Using Standby
133