Toshiba S1 User Manual page 187

S1 user's guide
Hide thumbs Also See for S1:
Table of Contents

Advertisement

The computer starts, but then shuts down and the on/off
light glows amber and blinks.
The computer has become too hot, so it has automatically
shut down. Leave the computer turned off until its interior has
reached room temperature (88 degrees Fahrenheit/30 degrees
Celsius or less).
If the computer will not start after it has been turned off for a
while, remove the battery and reinsert it. For instructions on
removing the battery, see
The computer starts but, when you press a key on the
keyboard or touch the Dual Point device(s), nothing
happens.
To clear the condition, press
Clearing the condition may get you running, but it won't
solve a resource conflict. Read the documentation that came
with the conflicting device and
conflict" on page
The message "Boot system has changed" appears.
Wait for the setting change to be completed. This may take
several minutes.
The message "Bad XXXX XXXX" appears after the
Toshiba logo is displayed.
Press
to enter the setup screen. Then press
F1
sure the computer settings are at their default values.
The message "Warning: XXXX" appears after the
Toshiba logo is displayed.
Press
Enter
The message "Password=" appears after the Toshiba
logo is displayed.
This message is displayed when the password has been set. If
this message appears, enter the password and then press
Problems when you turn on the computer
188.
several times.
Troubleshooting Guide
"Changing batteries" on page
and
Ctrl, Alt,
"Resolving a hardware
187
simultaneously.
Del
to make
Home
129.
.
Enter

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tecra s1-117

Table of Contents