❖
7
Click OK.
8
Click OK again, then close the Control Panel.
NOTE
Starting again after Shut down
To start the computer up again, press the power button until
the on/off light changes to green.
If you shut down the computer by closing the display panel,
you can start it again by opening the display panel.
Using Hibernation
Enabling the Hibernation Command
To use Hibernation, you must first enable the Hibernate
option in the Toshiba Power Saver utility.
To access Power Saver Hibernate Properties:
1
Open the Start menu, point to Settings, then click Control
Panel.
2
In the Control Panel window, double-click the Toshiba
Power Saver icon.
To enable the Hibernation mode from the Toshiba Power
Saver Properties dialog box:
1
Click the Hibernate tab.
Windows 2000 Supplemental Information
Click All for the settings to apply whether you are using
battery power or outlet power.
For more information about the Power Saver utility, see
"Power Saver" on page
Using Hibernation
167.
231