Toshiba S1 User Manual page 196

196
Troubleshooting Guide
Resolving a hardware conflict
Windows displays a message that there is a problem
with your display settings and that the adapter type is
incorrect or the current settings do not work with your
hardware.
Reduce the size of the color palette to one that is supported by
the computer's internal display.
The display is set to a simultaneous display mode (LCD/
CRT or LCD/TV) and the external display device does
not work.
Make sure the resolution of the external display device and
the internal display match. For example, if the external device
is only capable of displaying resolutions up to 800 x 600,
you'll need to change the resolution of the internal display to
800 x 600.
You are using an external display device and part of the
desktop is not visible.
If the desktop area is set to a resolution greater than 640 x
480, the external device goes into "virtual" display mode.
This means that part of the desktop will not display on the
screen. You can view the "lost" area by scrolling to it.
Even if your desktop area is set to 640 x 480, some of the
desktop will be outside of the viewing area. This is because
most televisions and video projectors overscan by 15 to 20
percent. You can view the edge of the desktop by scrolling to
it.
Small bright dots appear on your TFT display when you
turn on your computer.
Your display contains an extremely large number of thin-film
transistors (TFT) and is manufactured using high-precision
technology. The small bright dots that appear on your display
are an intrinsic characteristic of the TFT manufacturing
technology.