Toshiba S1 User Manual page 198

198
Troubleshooting Guide
Resolving a hardware conflict
You may also be able to recover lost data by using utility
software, which is available from your network administrator.
Some programs run correctly but others do not.
This is probably a configuration problem. When a program
does not run properly, refer to its documentation and check
that the hardware configuration meets its needs.
A diskette will not go into the diskette drive.
You may already have a diskette in the drive. Make sure the
drive is empty.
You may be inserting the diskette incorrectly. Hold the
diskette by its label with the hub side facing down, and insert
it so that the metal head window cover goes into the drive
first.
The metal cover or loose labels may be obstructing the path
into the drive. Carefully inspect the diskette. If the metal
cover is loose, replace the diskette. If the label is loose,
replace the label and try inserting the diskette again.
The computer displays the
message.
If you're starting the computer from the hard disk, make sure
there's no diskette in the diskette drive.
If you're starting the computer from a diskette, the diskette in
the drive does not have the files necessary to start the
computer. Replace it with a bootable diskette.
The drive cannot read a diskette.
Try another diskette. If you can access the second diskette,
the first diskette (not the diskette drive) is probably causing
the problem. Run Check Disk on the faulty diskette.
If you're using the diskette drive externally, unplug the cable
and plug it back in to make sure the connection between the
diskette drive cable and the port is secure.
Non-system disk or disk error