Starting Again From Standby - Toshiba 4010 User Manual

7 Click Override all Modes with settings here.
The Set the range window appears.
Sample Set the range window with DC only option
8 Do one of the following:
❖
❖
9 Click OK to close the Full Power Properties window.
10 Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.

Starting again from Standby

To start up the computer from Standby mode, press and
release the power button until the on/off light changes to
green. The computer returns to the screen you were using.
If you put the computer in Standby mode by closing the
display panel, you can start the computer again by opening
the display panel.
can set the System standby time on the Power Save
Mode tab.
Click DC only for the settings to apply only when
you are using battery power.
Click All for the settings to apply whether you are
using battery power or outlet power.
Enhancing Productivity
Using Standby
149