Disabling A User Password - Toshiba S1 User Manual

12 Press

Disabling a user password

To cancel the password that supports the instant and power-
on password functions:
1 Click Start, then Control Panel.
2 Click Printers and Other Hardware.
3 Click Toshiba HW Setup.
4 Select the Password tab.
5 Click Not Registered.
6 Type your password in the Enter Password box and click
OK
7 Click Exit.
Disabling a user-level password in System Setup
To register a user-level password in System Setup and create
a password service diskette:
1 Click Start, then Shut Down. Select Shut down and click
OK.
to save and exit System Setup.
OK
.
TECHNICAL NOTE: You have three tries to enter the correct
password. After an incorrect try, an "Incorrect Password"
dialog box will appear. Click OK to reenter the password.
After three incorrect tries, this message appears:
"Sorry, access denied! Reboot is required to regain access."
You will need to turn off the computer, then reboot.
Keeping Your Files Safe
User-level passwords
175