Download Print this page

Rotax 912 i Series Service Instructions Manual page 5

Selection of suitable operating fluids
Hide thumbs Also See for 912 i Series:

Advertisement

SI-912 i-001R4
SI-912-016R9 / SI-914-019R9
4) Coolant
4.1) General
All engine types 912 i, 912 and 914 Series have liquid cooled cylinder heads and ram air cooled
cylinders. The function of the coolant is to protect the cylinder heads from over-temperature by
means of heat dissipation. Protection against corrosion of the engine components and freezing of
the coolant is achieved with appropriate additives.
In principle, 2 different types of coolant are permitted:
-
Conventional coolant based on ethylene glycol with 50% water content
-
Waterless coolant based on propylene glycol (not allowed for 912 i Series)
4.2) Conventional coolant
Conventional coolant (with about 50% water content) has a specific thermal capacity that is higher
than waterless coolant. It gives excellent corrosion protection, especially for aluminum, and pro-
tection against freezing.
NOTE:
m
NOTE:
Coolants with a mixture of 50% antifreeze and 50% of distilled water recommended by the
authorized distributors (not tested from BRP-Rotax).
NOTE:
27 March 2017
Copyright - BRP-Rotax GmbH & CO KG. All rights reserved.
For exact monitoring of the coolant temperature, a limit has been set. This
is necessary because standard coolant based on ethylene glycol such as
BASF Glysantin in a 50/50 proportion mixture can boil at a temperature as
low as 120 °C (248 °F). Refer to the current Installation Manual for more
information and instructions.
The certification and determination of the correct coolant type must be
NOTICE
WARNUNG
conducted by the aircraft manufacturer. As each aircraft type has different
characteristics, testing must be done to determine the most suitable cool-
ant and instrumentation for each aircraft type.
Coolant should be a low silicate and nitrite free formula. Follow coolant
manufacturer directions regarding mixture percentages etc..
The following list is based on the experiences and local recommendation
by the authorized distributors. Coolant brands, with same designation, may
vary from one to the other region. Please contact the local distributor for a
recommendation.
Brand
®
BASF
®
CASTROL
®
CASTROL
®
OMV
®
PETROL
PRESTONE
PRESTONE
®
SHELL
®
SHELL
®
TEXACO
SERVICE INSTRUCTION
Description
Glysantin Protect Plus/G48
Antifreeze All-Climate
Antifreeze Anti-Boil
OMV Coolant Plus
Antifreeze Concentrate / Antifreeze G 11
®
DEX-COOL extended life
®
50/50 preluded DEX-COOL extended life
DEX-COOL
Antifreeze Concentrate
Havoline Extended Life Antifreeze
12-10-00
page 5 of 11

Advertisement

loading
Need help?

Need help?

Do you have a question about the 912 i Series and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

912 series914 series