Sensor Head Installation; Installing Direction - OPTEX FA CD5 Series Instruction Manual

Sensor Head Installation

・ Avoid the position of operator's eye height for sensor head
・ Turn off the controller before connecting/disconnecting the sensor
・ Do not drop or apply a shock to the product. It may damage the

Installing Direction

For a stable and accurate measurement, install the sensor head in the following
direction to the target object.
● Object with steps
12
SENSOR HEAD-MANUAL-E.indd 12
installation.
head to/from the controller.
product or lower the accuracy.
Displacement sensor
Ramco Innovations 800-280-6933 www.optex-ramco.com
13.12.17 4:41:14 PM