Microbio Mb2-Hiflow Technical Specification - Cantium Scientific MicroBio MB2 Operating Manual

MicroBio MB2-HiFlow
Flow Rate:
Sample Volume:
Sampling Volume Capacity: ~ 40,000 litres before recharge*
d50 Particle size:
Mean particle velocity:
Weight (excluding charger
and carry bag):
Dimensions:
Power:
Noise Level:
Environmental Operating
Range:
Sampling Plate:
Sampling Head:
* Based upon random samples until low battery warning given. These tests were undertaken on units fitted with
new and fully charged Ansmann Max-e 2500 mA.Hr NiMh cells. Actual battery life may vary due to volume taken
per sample, interval between samples, age of cells, and other environmental effects, such as humidity and
temperature.
‡ Calibrated at 1013mbar 20ºC. Environmental conditions will affect air pressure thus mass/volumetric flow rates.
Technical Specification
180 L.min
-1 ‡
10 to 10,000 litres in varying steps
1.71 µm
9.55 ms -1
840g (inc. battery and petri dish)
196 x 100 x 110mm (inc. head)
4 x AA NiMh Cells
6V at 600mA (maximum)
< 80dB @ 1m
-10 to 50°C up to 90% RH
90mm petri dish
Stainless Steel 400 x 1.0mm holes
8
‡