Microbio Mb2 Technical Specification - Cantium Scientific MicroBio MB2 Operating Manual

MicroBio MB2
Flow Rate:
Sample Volume:
Sampling Volume Capacity: ~ 60,000 litres before recharge*
d50 Particle size:
Mean particle velocity:
Weight (excluding charger
and carry bag):
Dimensions:
Power:
Noise Level:
Environmental Operating
Range:
Sampling Plate:
Sampling Head:
* Based upon random samples until low battery warning given. These tests were undertaken on units fitted with
new and fully charged Ansmann Max-e 2500 mA.Hr NiMh cells. Actual battery life may vary due to volume taken
per sample, interval between samples, age of cells, and other environmental effects, such as humidity and
temperature.
‡ Calibrated at 1013mbar 20ºC. Environmental conditions will affect air pressure thus mass/volumetric flow rates.
Technical Specification
100 L.min
10 to 10,000 litres in varying steps
1.7 µm (220 x 1mm hole head)
1.35 µm (400 x 0.7mm hole head)
9.62 ms
10.7 ms
780 g (inc. battery and petri dish)
196 x 100 x 110mm (inc. head)
4 x AA NiMh Cells
6V at 250mA (maximum)
< 75dB @ 1m
-10 to 50°C up to 90% RH
55mm/65mm contact plate
or
90mm petri dish
316 grade stainless steel 220 x 1mm holes
or
Anodised aluminium 400 x 0.7mm holes
-1 ‡
-1 (220 x 1mm hole head)
(400 x 0.7mm hole head)
-1
7
‡