Sequential Sampling - Configuration - Cantium Scientific MicroBio MB2 Operating Manual

The sampling sequence illustrated below, shows how the sample is broken
down into five smaller samples of 200 litres each. t
MB2 will be 2 minutes for each 200 litres of air.
Using the equation above, the interval between each of these 200 litre
samples is calculated as 7,050 seconds or 1 hour, 57 minutes and 30
seconds. At the end of the sampling sequence the MicroBio MB2 displays a
finished message and will automatically power off. When the MicroBio MB2
is next switched on, it will display a finished message with the total volume of
air sampled.
Sequential Sampling - Configuration
Sequential
Sampling
Navigate to this option using
Select the volume to be sampled by choosing a preset or manually adjust
⊖
volume. Press
adjustment. Press
Sample Method -
Preset Volume
Sample Method -
Adjust Volume
MENU
button to select preset option or
START to confirm selection.
s
and press START.
20
for a standard MicroBio
⊕
to select manual