Cantium Scientific Limited! P0002W006 - MicroBio MB2-RSH Installation and Operation Supplement Technical Specification! Please refer to the MicroBio Manual P0001W003 for full detailed specification of the MicroBio MB2.! The MB2-RSH model is capable of driving a remote sampling fan up to a distance of 20m from the control unit.!
Page 7
Cantium Scientific Limited! P0002W006 - MicroBio MB2-RSH Installation and Operation Supplement 2. Fit connector housing and strain relief onto cable end. 3. Remove cable clamp. 4. FIt frame onto cable end and refit cable clamp. Issue 2! / 7 12...
Page 8
Cantium Scientific Limited! P0002W006 - MicroBio MB2-RSH Installation and Operation Supplement 5. Solder cable onto connector pins. The connector body has pin numbers embossed onto the surface adjacent to the pins. i. Pin 1: Red! ii. Pin 2: Blue! iii. Pin 3: Screen ...
Page 9
Cantium Scientific Limited! P0002W006 - MicroBio MB2-RSH Installation and Operation Supplement 7. Slide the assembly, strain relief and metal shell together. 8. Align shell so that the brass thread of the frame body can be seen, then replace the housing screw and tighten. ...
Cantium Scientific Limited! P0002W006 - MicroBio MB2-RSH Installation and Operation Supplement Connecting the Control Unit and remote Sampling Head! Now position the remote sampling head and connect the fly lead on this to the extension cable end labelled “RSH”. The connectors have a screw locking mechanism. Screw the two halves together by twisting the outer ring of the plug from the the remote sampling head connector into the cable socket on the extension cable.
Cantium Scientific Limited! P0002W006 - MicroBio MB2-RSH Installation and Operation Supplement Calibration! The MB2-RSH can be calibrated in the same manner as any other MicroBio bioaerosol sampler.! Remove the remote sampling head from its normal location, disconnect the extension cable from the control unit and then plug the remote sampling head directly into the control...
30 minutes! ! Aeration time! ! 150 minutes! As the MicroBio MB2-RSH has a fan within the remote head it is recommended that during the decontamination process the MicroBio MB2-RSH is set to sample 2000 litres several times so that the H vapour may be drawn through the head, fan and exhaust for optimum decontamination.!