Switching On And Off - Cantium Scientific MicroBio MB2 Operating Manual

Switching On and Off

To switch the unit on press the
The MicroBio MB2 will initially indicate the
battery condition:
MicroBio MB2
Battery: OK
If the battery is too low, the MicroBio MB2 will
issue a warning to change the battery and then
automatically switch off. This is to protect the
battery pack and not allow samples to be taken
that may not complete.
LOW BATTERY!
CHANGE BATTERY
To switch off the MicroBio MB2, press the
MB2 will automatically switch off after a period of inactivity. Automatic and
manual switch off is prevented during sampling, delayed start and sequential
sampling. When switching off, a warning will sound and the display will show
"switching off" while the MicroBio MB2 saves usage data to memory.
Switching off
ON/OFF button.
ON/OFF
15
button. The MicroBio